As I understand that it's more or less just a JBOD with SAS expander when used like this. Is there anything else I can check? Is it possible that there is anything on the DS4246 that I might need set. The only things I can think of trying at this point is to set the Boot support option to "OS Only", try the same setup with UnRAID to see if I have the same issue to rule out the OS, and covering up pins A5 & A6 in case of an SMBIOS issue as is the case with some Dell HBA's that have been flashed to IT mode. It's set to "BIOS & OS" which should be fine. I also checked that my boot support wasn't "BIOS ONLY". To rule out it being an issue with the 8TB drives I also installed a 2TB drive that I had lying around. I however neither see the drives under the device manager or disk management in the Windows 2016 OS. I can see all my drives in the HBA's bios likewise with any of the Storage Management Utilities such as MegaRaid and LSI Storage Authority the DS4246 and Drives all show up. ![]() ![]() The HBA driver shows up as Avago Adapter, SAS3 3008 Fury - Storport. I have this connected to a Dell RX730xd running Windows Server 2016. I have a DS4246 with 8TB SATA drives connected to a LSI 3008e(Lenovo N2225) HBA flashed to P16 IT Mode firmware.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |